Slash Stock Car

Slash Stock Car

• BODY: Minimum Ride Height: .750" (including body). Bodies to be used ANY short coarse stock car type of body. MAX 1” spoiler and end caps. Decking bodies will be allowed as of 8/15/23.

• CHASSIS: Traxxas LCG chassis kit and the HCG chassis kit are legal. All parts that Traxxas makes for the 2wd electric slash are allowed, including new extreme heavy duty parts and the GTR shock kits. All RPM parts made for 2wd Traxxas Slash are allowed. Must use stock Traxxas Slash 2wd chassis and components, unmodified, unless otherwise specified. No modifying, replacing, or removing any components unless otherwise specified. All suspension components must be installed in the proper position and orientation on the car from the factory, which means a left arm must be on the left side and the right arm must be on the right side. Bumpers will be allowed. The "hoop" and "ears" on the front bumper may be cut off, however, the main area of the bumper must remain intact (unless you are running a body manufactures front body mount/bumper. Any additional weight must be mounted to the chassis plate area. NO weight added to the suspension arms. No added weight extended beyond the chassis plate footprint in any manner.

• DRIVETRAIN: Locking or modifying the differential in any way will not be allowed. The differential must have normal diff action when rotating one rear tire against the normal compression (resistance) of the motor. No ball diffs. NO SWAY BARS. Slipper Eliminator is allowed. RPM Transmissions must run the 3* Arm Mounts.

• MOTOR/ESC: Must use the stock XL-5 ESC(unaltered) & unaltered Traxxas Titan 12t 550 brushed motor, the new Traxxas BL-2s systems, or a non-modified Hobbywing 13.5 Justock Brushless motor/ESC System. Tuning, tweaking, or modifying the motor in any way will not be allowed.

• BATTERY: open battery, Max charge of 8.44v and hard case only. Battery must be mounted in the stock center tray location, but can be moved forward or back as long as it stays within the stock boundaries of the battery tray. Any plug may be used for the battery to ESC connection. However, direct soldering to the battery will not be allowed. All batteries MUST be charged in a Lipo Sack. Batteries should not exceed 8.44 volts, will be checked with volt meter. No heating pads or devices for batteries.
  

• TIRES: DE Phenom, Traxxas Hoosier tires, or any of the Traxxas brand slash tires are the only tires allowed. Any 2.2/3.0 short course wheel will be allowed Altering the inside of the tire in any way will not be allowed. However, gluing or taping the outside of the tire to help prevent traction rolling will be allowed. One foam insert per tire only.

• SHOCKS: Any Traxxas 2WD Slash shocks may be used and the GTR shocks. Any tuning spring by Traxxas will be allowed. Springs may not be cut or altered from factory in any way. Aluminum shock caps (any color) are allowed. The shock oil or shock travel/length will not be mandated. 2-stage pistons or any modification to the shock piston to tune the compression and rebound separately will not be allowed. Aftermarket springs are allowed.

ONLY CERTAIN TRACTION COMPOUNDS MAY BE USED AT GO FAST RACEWAY DUE TO CHEMICAL ODOR/SMELL. PLEASE SEE GENERAL RULES SECTION!